Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) High-Density Polyethylene (HDPE) Tubing, 1/2 x 5/8"", 100 ft/pack
Applications: General-purpose lab and industrial use. Characteristics: Low moisture absorption, good chemical and corrosion-resistance, high tensile strength. Certifications: None. Temperature range: ¿103 to 151¿F (¿75 to 66¿C) Sterilize: Autoclave.
Med Vet International Dynarex Etco2 Nasal Sampling Cannula, 7' (2.1 M) Tubing w/Male Luer, infant/Standard 02 Tubing Connector, 25/Case
Dynarex Resp-O2 EtCO2 Nasal Sampling Cannulas with Cushion Nasal Tips are designed to help monitor exhaled carbon dioxide during respiratory treatment. Each soft, cushioned cannula features a permanent barrier between the nasal prongs so that EtCO2 can be sampled from one nostril while oxygen continues to flow to the other nostril. Permanent barrier between nasal prongs allows for EtCO2 sampling with uninterrupted oxygen delivery Constructed from soft materials for added patient comfort Crush-resistant tubing helps prevent occlusion and kinking Features EtCO2 sampling line and O2 tubing of equal length Transparent design allows for clear visualization Not made with natural rubber latex or DEHP
Grainger Corrugated Tubing PE 1/2 in 100 ft
The 1/2" Corrugated Loom Tubing by Electriduct is a flexible plastic tubing designed to protect and organize wires and cables. It features a corrugated design which allows it to easily flex and bend. The tubing has an inner diameter of 1/2" and is sold by the foot, with common lengths being 25, 50, and 100 foot rolls. It can withstand temperatures between -20°F to 176°F. This abrasion resistant vinyl tubing is UL recognized and CSA certified. It works well for running bundles of wire through tight spaces and providing protection from liquids, oils, and abrasion.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, FEP, 3/32"" ID x 5/32"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn¿t deteriorate with age. Tough, but bends even at -454¿F (-270¿C). Translucent. Certifications: Resin is FDA-compliant (21 CFR 177.1550). Tubing is manufactured in ISO 9001-2008 approved facility. Temperature range: -454 to 400¿F (-270 to 205¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
Accuflow Systems Saint-Gobain Fuel and Lubricant Tubing, PVC, 1/4 in, 50 ft
Flexible tubing formulated for fuel and lubricant transfer that resists swelling, hardening, and embrittlement caused by hydrocarbon-based fluids. Translucent yellow construction allows visual flow monitoring. Supplied in 50 ft coils for small-engine and industrial fluid transfer applications.
- Resists swelling and hardening from hydrocarbon fuels.
- 1/4 in inner diameter, 3/8 in outer diameter, 1/16 in wall thickness.
- Translucent yellow for easy flow monitoring.
- Maximum recommended operating temperature 165°F (74°C).
- Maximum working pressure 30 psi at 73°F.
- Bend radius approximately 1 in for routing in tight spaces.
- Sold in 50 ft package length.
Accuflow Systems C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon 3370 I.B. Reinforced Platinum-Cured Silicone, 1/2"" ID x 13/16"" OD; 50 ft
Formulation: Tygon 3370 I. B., silicone, platinum cured. Applications: Demanding sanitary high-pressure pharmaceutical, biotechnology, food and beverage, and cosmetic applications. Characteristics: Excellent heat resistance, low compression set, odorless, and nontoxic. Translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and USP Class V extractables; exceeds Class VI implant; exceeds 3A Sanitary Standards; produced to Bulk Pharmaceutical cGMPs (FDA 21 CFR 210, 211). Tubing manufactured according to GMP Temperature range: ¿60 to 320¿F (¿51 to 160¿C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation.
Accuflow Systems Saint-Gobain C-Flex Tubing, 0.250 in x 0.375 in, 350 ft
C-Flex TPE tubing (Formulation 374) is a thermoplastic elastomer tubing supplied on 350 ft mini spools for high-purity bioprocessing and single-use fluid transfer. It is formulated for peristaltic pump compatibility, aseptic welding, and common sterilization processes.
- Translucent thermoplastic elastomer construction.
- Inner diameter 0.250 in, outer diameter 0.375 in, wall thickness 0.062-0.063 in.
- Supplied as a 350 ft mini spool, single pack.
- Suitable for peristaltic pump use and single-use assemblies.
- Compatible with aseptic welding and sealing operations.
- Sterilizable by autoclave (one-time 121°C/30 min) and by gamma or X-ray irradiation up to 50 kGy (one-time).
AVANTOR MASTERFLEX (VWR LLC) Catalyst Stopped Tubing Assembly, Platinum-Cured Silicone, 4.8 mm ID, 6 pk
Start pumping with little effort, as preconfigured links aid quick and easy setup. Ensure the optimal amount of tubing is in the pump head. Use with the Catalyst extension coils / tubing to complete your system.
Accuflow Systems TPE Tubing
Purity One™ OneFlex Biopharmaceutical grade TPE tubing has been formulated for demanding and critical fluid transfer applications in Biopharmaceutical processing. OneFlex is an excellent choice for applications that require heat sealing and sterile welding capabilities, and also can be molded for single-use assemblies such as bottle top inserts. Purity One OneFlex is an excellent choice for applications such as sampling, aseptic welding, aseptic sealing, filtration, and sterile filling and transfer. Full validation guide and USP <665> Extractables testing available.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PharMed BPT, 1/2"" ID x 3/4"" OD; 25 ft
This tubing is ideal for general laboratory use. They offer long life, won't age or oxidize, fits tightly to glass and metal, bends to small radius curves, are nontoxic. FDA compliant and made according to GMP. Temperature range is -51 to 165¿F (-46 to 73¿C). Can be sterilized with ethylene oxide or autoclave.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 1/2" X 5/8"- 100 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.